http://plumbingwithpex.com Thu, 02 Feb 2012 18:15:40 +0000 en hourly 1 http://plumbingwithpex.com/watts/34-inch-8ac-hose-connection-chrome-finish-vacuum-breaker-63055/ http://plumbingwithpex.com/watts/34-inch-8ac-hose-connection-chrome-finish-vacuum-breaker-63055/#comments Fri, 25 Nov 2011 01:47:37 +0000 pexsupply111125 http://plumbingwithpex.com/watts/34-inch-8ac-hose-connection-chrome-finish-vacuum-breaker-63055/
Product: 3/4-inch 8AC, Hose Connection Chrome Finish Vacuum Breaker
Manufacturer: Watts

Part Number: 63055

Price: $6.15

Free Shipping Eligible: No
Description: Series 8 Hose Connection Vacuum Breakers permit the attachment of portable hoses to hose thread faucets and prevent the reverse flow of polluted water into the potable water supply due to backsiphonage.
It consists of a brass body construction, stainless steel working parts, and a rubber diaphragm and disc. Series 8 is ideal for inside and outside, health hazard installations requiring non-continuous pressure such as service sinks, swimming pools, photo developing tanks, laundry tubs, wash racks, dairy barns, marinas, and general outside gardening uses. Check with local inspection authorities for installation requirements.
Maximum Pressure:125psi (8.6 bar).

]]> http://plumbingwithpex.com/watts/34-inch-8ac-hose-connection-chrome-finish-vacuum-breaker-63055/feed/ 0 http://plumbingwithpex.com/watts/10l-2-34-inch-t-p-relief-valve-150-psi-64014/ http://plumbingwithpex.com/watts/10l-2-34-inch-t-p-relief-valve-150-psi-64014/#comments Fri, 25 Nov 2011 01:47:37 +0000 pexsupply111125 http://plumbingwithpex.com/watts/10l-2-34-inch-t-p-relief-valve-150-psi-64014/
Product: 10L-2, 3/4-inch T & P Relief Valve -150 psi
Manufacturer: Watts

Part Number: 64014

Price: $32.95

Free Shipping Eligible: No
Description: Model 10L Temperature and Pressure Relief Valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 80,000 BTU/hr. It features a bronze body with NPT threaded male inlet and NPT threaded female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. Model 10L is ASME rated and CSA listed.

]]> http://plumbingwithpex.com/watts/10l-2-34-inch-t-p-relief-valve-150-psi-64014/feed/ 0 http://plumbingwithpex.com/watts/38-inch-onix-tubing-120-ft-coil-086061-120/ http://plumbingwithpex.com/watts/38-inch-onix-tubing-120-ft-coil-086061-120/#comments Fri, 25 Nov 2011 01:47:37 +0000 pexsupply111125 http://plumbingwithpex.com/watts/38-inch-onix-tubing-120-ft-coil-086061-120/
Product: 3/8-inch Onix Tubing (120 ft. coil)
Manufacturer: Watts

Part Number: 086061-120

Price: $166.95

Free Shipping Eligible: No
Description: What makes Onix so well suited for radiant heat and snow melting applications?
Cross-linked Durel EPDM is extruded into a tube and wrapped with an AlumaShield barrier and a second layer of EPDM. This composite tube is reinforced with 1000 denier aramid cord, the same incredibly tough and heat resistant material used to make fire and bullet proof shields. A final outer jacket of EPDM is applied. The result is a durable, flexible tubing formed of five heat and age resistant materials, proven in tens of thousands of installations over the years.
One of the best features of our Onix tubing is its aluminum barrier layer, AlumaShield+. Unlike plastic barriers, AlumaShield is unaffected by sunlight, UV radiation from fluorescent lamps, moisture, or elevated temperatures. Due to its placement inside the tube, the AlumaShield barrier can't be scraped off or damaged by typical job site abuse.
Onix is the product that can be installed with lifelong confidence in blazing heat and sunlight, or in Arctic frost and shadows. Used for commercial snowmelting, space heating, residential staple-up and supply/return lines, you'll find Onix installed in thousands of quality projects every year.

]]> http://plumbingwithpex.com/watts/38-inch-onix-tubing-120-ft-coil-086061-120/feed/ 0 http://plumbingwithpex.com/watts/38-inch-onix-tubing-140-ft-coil-086061-140/ http://plumbingwithpex.com/watts/38-inch-onix-tubing-140-ft-coil-086061-140/#comments Fri, 25 Nov 2011 01:47:37 +0000 pexsupply111125 http://plumbingwithpex.com/watts/38-inch-onix-tubing-140-ft-coil-086061-140/
Product: 3/8-inch Onix Tubing (140 ft. coil)
Manufacturer: Watts

Part Number: 086061-140

Price: $182.95

Free Shipping Eligible: No
Description: What makes Onix so well suited for radiant heat and snow melting applications?
Cross-linked Durel EPDM is extruded into a tube and wrapped with an AlumaShield barrier and a second layer of EPDM. This composite tube is reinforced with 1000 denier aramid cord, the same incredibly tough and heat resistant material used to make fire and bullet proof shields. A final outer jacket of EPDM is applied. The result is a durable, flexible tubing formed of five heat and age resistant materials, proven in tens of thousands of installations over the years.
One of the best features of our Onix tubing is its aluminum barrier layer, AlumaShield+. Unlike plastic barriers, AlumaShield is unaffected by sunlight, UV radiation from fluorescent lamps, moisture, or elevated temperatures. Due to its placement inside the tube, the AlumaShield barrier can't be scraped off or damaged by typical job site abuse.
Onix is the product that can be installed with lifelong confidence in blazing heat and sunlight, or in Arctic frost and shadows. Used for commercial snowmelting, space heating, residential staple-up and supply/return lines, you'll find Onix installed in thousands of quality projects every year.

]]> http://plumbingwithpex.com/watts/38-inch-onix-tubing-140-ft-coil-086061-140/feed/ 0 http://plumbingwithpex.com/watts/38-inch-onix-tubing-160-ft-coil-086061-160/ http://plumbingwithpex.com/watts/38-inch-onix-tubing-160-ft-coil-086061-160/#comments Fri, 25 Nov 2011 01:47:37 +0000 pexsupply111125 http://plumbingwithpex.com/watts/38-inch-onix-tubing-160-ft-coil-086061-160/
Product: 3/8-inch Onix Tubing (160 ft. coil)
Manufacturer: Watts

Part Number: 086061-160

Price: $208.95

Free Shipping Eligible: No
Description: What makes Onix so well suited for radiant heat and snow melting applications?
Cross-linked Durel EPDM is extruded into a tube and wrapped with an AlumaShield barrier and a second layer of EPDM. This composite tube is reinforced with 1000 denier aramid cord, the same incredibly tough and heat resistant material used to make fire and bullet proof shields. A final outer jacket of EPDM is applied. The result is a durable, flexible tubing formed of five heat and age resistant materials, proven in tens of thousands of installations over the years.
One of the best features of our Onix tubing is its aluminum barrier layer, AlumaShield+. Unlike plastic barriers, AlumaShield is unaffected by sunlight, UV radiation from fluorescent lamps, moisture, or elevated temperatures. Due to its placement inside the tube, the AlumaShield barrier can't be scraped off or damaged by typical job site abuse.
Onix is the product that can be installed with lifelong confidence in blazing heat and sunlight, or in Arctic frost and shadows. Used for commercial snowmelting, space heating, residential staple-up and supply/return lines, you'll find Onix installed in thousands of quality projects every year.

]]> http://plumbingwithpex.com/watts/38-inch-onix-tubing-160-ft-coil-086061-160/feed/ 0 http://plumbingwithpex.com/watts/38-inch-onix-tubing-180-ft-coil-086061-180/ http://plumbingwithpex.com/watts/38-inch-onix-tubing-180-ft-coil-086061-180/#comments Fri, 25 Nov 2011 01:47:37 +0000 pexsupply111125 http://plumbingwithpex.com/watts/38-inch-onix-tubing-180-ft-coil-086061-180/
Product: 3/8-inch Onix Tubing (180 ft. coil)
Manufacturer: Watts

Part Number: 086061-180

Price: $235.99

Free Shipping Eligible: No
Description: What makes Onix so well suited for radiant heat and snow melting applications?
Cross-linked Durel EPDM is extruded into a tube and wrapped with an AlumaShield barrier and a second layer of EPDM. This composite tube is reinforced with 1000 denier aramid cord, the same incredibly tough and heat resistant material used to make fire and bullet proof shields. A final outer jacket of EPDM is applied. The result is a durable, flexible tubing formed of five heat and age resistant materials, proven in tens of thousands of installations over the years.
One of the best features of our Onix tubing is its aluminum barrier layer, AlumaShield+. Unlike plastic barriers, AlumaShield is unaffected by sunlight, UV radiation from fluorescent lamps, moisture, or elevated temperatures. Due to its placement inside the tube, the AlumaShield barrier can't be scraped off or damaged by typical job site abuse.
Onix is the product that can be installed with lifelong confidence in blazing heat and sunlight, or in Arctic frost and shadows. Used for commercial snowmelting, space heating, residential staple-up and supply/return lines, you'll find Onix installed in thousands of quality projects every year.

]]> http://plumbingwithpex.com/watts/38-inch-onix-tubing-180-ft-coil-086061-180/feed/ 0 http://plumbingwithpex.com/watts/38-inch-onix-tubing-200-ft-coil-086061-200/ http://plumbingwithpex.com/watts/38-inch-onix-tubing-200-ft-coil-086061-200/#comments Fri, 25 Nov 2011 01:47:37 +0000 pexsupply111125 http://plumbingwithpex.com/watts/38-inch-onix-tubing-200-ft-coil-086061-200/
Product: 3/8-inch Onix Tubing (200 ft. coil)
Manufacturer: Watts

Part Number: 086061-200

Price: $261.95

Free Shipping Eligible: No
Description: What makes Onix so well suited for radiant heat and snow melting applications?
Cross-linked Durel EPDM is extruded into a tube and wrapped with an AlumaShield barrier and a second layer of EPDM. This composite tube is reinforced with 1000 denier aramid cord, the same incredibly tough and heat resistant material used to make fire and bullet proof shields. A final outer jacket of EPDM is applied. The result is a durable, flexible tubing formed of five heat and age resistant materials, proven in tens of thousands of installations over the years.
One of the best features of our Onix tubing is its aluminum barrier layer, AlumaShield+. Unlike plastic barriers, AlumaShield is unaffected by sunlight, UV radiation from fluorescent lamps, moisture, or elevated temperatures. Due to its placement inside the tube, the AlumaShield barrier can't be scraped off or damaged by typical job site abuse.
Onix is the product that can be installed with lifelong confidence in blazing heat and sunlight, or in Arctic frost and shadows. Used for commercial snowmelting, space heating, residential staple-up and supply/return lines, you'll find Onix installed in thousands of quality projects every year.

]]> http://plumbingwithpex.com/watts/38-inch-onix-tubing-200-ft-coil-086061-200/feed/ 0 http://plumbingwithpex.com/watts/38-inch-onix-tubing-600-ft-coil-086061-600/ http://plumbingwithpex.com/watts/38-inch-onix-tubing-600-ft-coil-086061-600/#comments Fri, 25 Nov 2011 01:47:37 +0000 pexsupply111125 http://plumbingwithpex.com/watts/38-inch-onix-tubing-600-ft-coil-086061-600/
Product: 3/8-inch Onix Tubing (600 ft. coil)
Manufacturer: Watts

Part Number: 086061-600

Price: $783.95

Free Shipping Eligible: Yes
Description: What makes Onix so well suited for radiant heat and snow melting applications?
Cross-linked Durel EPDM is extruded into a tube and wrapped with an AlumaShield barrier and a second layer of EPDM. This composite tube is reinforced with 1000 denier aramid cord, the same incredibly tough and heat resistant material used to make fire and bullet proof shields. A final outer jacket of EPDM is applied. The result is a durable, flexible tubing formed of five heat and age resistant materials, proven in tens of thousands of installations over the years.
One of the best features of our Onix tubing is its aluminum barrier layer, AlumaShield+. Unlike plastic barriers, AlumaShield is unaffected by sunlight, UV radiation from fluorescent lamps, moisture, or elevated temperatures. Due to its placement inside the tube, the AlumaShield barrier can't be scraped off or damaged by typical job site abuse.
Onix is the product that can be installed with lifelong confidence in blazing heat and sunlight, or in Arctic frost and shadows. Used for commercial snowmelting, space heating, residential staple-up and supply/return lines, you'll find Onix installed in thousands of quality projects every year.

]]> http://plumbingwithpex.com/watts/38-inch-onix-tubing-600-ft-coil-086061-600/feed/ 0 http://plumbingwithpex.com/watts/12-inch-onix-tubing-200-ft-coil-086081-200/ http://plumbingwithpex.com/watts/12-inch-onix-tubing-200-ft-coil-086081-200/#comments Fri, 25 Nov 2011 01:47:37 +0000 pexsupply111125 http://plumbingwithpex.com/watts/12-inch-onix-tubing-200-ft-coil-086081-200/
Product: 1/2-inch Onix Tubing (200 ft. coil)
Manufacturer: Watts

Part Number: 086081-200

Price: $363.95

Free Shipping Eligible: Yes
Description: What makes Onix so well suited for radiant heat and snow melting applications?
Cross-linked Durel EPDM is extruded into a tube and wrapped with an AlumaShield barrier and a second layer of EPDM. This composite tube is reinforced with 1000 denier aramid cord, the same incredibly tough and heat resistant material used to make fire and bullet proof shields. A final outer jacket of EPDM is applied. The result is a durable, flexible tubing formed of five heat and age resistant materials, proven in tens of thousands of installations over the years.
One of the best features of our Onix tubing is its aluminum barrier layer, AlumaShield+. Unlike plastic barriers, AlumaShield is unaffected by sunlight, UV radiation from fluorescent lamps, moisture, or elevated temperatures. Due to its placement inside the tube, the AlumaShield barrier can't be scraped off or damaged by typical job site abuse.
Onix is the product that can be installed with lifelong confidence in blazing heat and sunlight, or in Arctic frost and shadows. Used for commercial snowmelting, space heating, residential staple-up and supply/return lines, you'll find Onix installed in thousands of quality projects every year.

]]> http://plumbingwithpex.com/watts/12-inch-onix-tubing-200-ft-coil-086081-200/feed/ 0 http://plumbingwithpex.com/watts/12-inch-onix-tubing-250-ft-coil-086081-250/ http://plumbingwithpex.com/watts/12-inch-onix-tubing-250-ft-coil-086081-250/#comments Fri, 25 Nov 2011 01:47:37 +0000 pexsupply111125 http://plumbingwithpex.com/watts/12-inch-onix-tubing-250-ft-coil-086081-250/
Product: 1/2-inch Onix Tubing (250 ft. coil)
Manufacturer: Watts

Part Number: 086081-250

Price: $424.95

Free Shipping Eligible: Yes
Description: What makes Onix so well suited for radiant heat and snow melting applications?
Cross-linked Durel EPDM is extruded into a tube and wrapped with an AlumaShield barrier and a second layer of EPDM. This composite tube is reinforced with 1000 denier aramid cord, the same incredibly tough and heat resistant material used to make fire and bullet proof shields. A final outer jacket of EPDM is applied. The result is a durable, flexible tubing formed of five heat and age resistant materials, proven in tens of thousands of installations over the years.
One of the best features of our Onix tubing is its aluminum barrier layer, AlumaShield+. Unlike plastic barriers, AlumaShield is unaffected by sunlight, UV radiation from fluorescent lamps, moisture, or elevated temperatures. Due to its placement inside the tube, the AlumaShield barrier can't be scraped off or damaged by typical job site abuse.
Onix is the product that can be installed with lifelong confidence in blazing heat and sunlight, or in Arctic frost and shadows. Used for commercial snowmelting, space heating, residential staple-up and supply/return lines, you'll find Onix installed in thousands of quality projects every year.

]]> http://plumbingwithpex.com/watts/12-inch-onix-tubing-250-ft-coil-086081-250/feed/ 0