PH28C Series Commercial Grade Direct Vent Paloma Tankless Water Heater (Propane) [PH-28C-DVSL]

Specifications
Capacity: Commercial Use
Vent Length Maximum : 37.5 ft. with 3 elbows
Rated Gas Input (BTUs/Hr.) : 19,000 – 199,900 (modulating)
Dimensions (inches): 14-7/8 (W) x 25-3/8 (H) x 11-1/8 (D)
Net Weight (lbs.): 55
Working Water Pressure: 14 psi (minimum); 150 psi (maximum)
Minimum Flow for Ingnition: 0.66 GPM
Gas Connection: 3/4" NPT Male
Thermal Efficiency: 0.82
Energy Factor (DOE): 0.82
Electrical Requirement: 120 VAC/60 Hz, Less than 2 Amps
Freeze Protection: Minus 30 degrees F (including windchill factor)
Controller/Diagnostic Display: UMC-117 (included)
Multi-Unit System Controller (sold separately):2- to 6-unit system: MIC-180 (includes installation box), 7- to 20-unit system: MIC-180 + MICS-180
Features
Endless hot water on demand
Energy efficiency – heats water only when it is needed
Compact, and takes no floor space (wall-hung installation)
Unmatched Safety Engineering
Proprietary ICAD Safety System (on indoor model)
Proprietary Film Wrap Overheat Limiter (on heat exchanger)
Flame failure and anti-boil protection
Freeze protection to minus 30 degrees F
Built-in diagnostics and usage record
Includes Digital Controller to set temperature and display diagnostics
180-degrees F maximum temperature setting
Minimum flow for ignition: 0.66 GPM
Power Return: AUTO-ON at last setting after power interruption
Low NOx emissions meet SCAQMD Rule 1146 requirements
Can be used in circulation systems up to 140 degrees F
Multi-Unit System Features
1- to 20-unit systems with 199,900 to 3.99 million BTUs/hr. inputs
MIC-180 Manifold Controller quickly and tightly calibrates firing, temperature and volume output of each unit in system
Control logic distributes heating load to maximize system life
Can be delivered and installed in tight locations
Built-in system back-up
Units can be serviced without shutting down the entire system
Commerical Warranty
5-Year Limited Warranty on Heat Exchanger
5-Year Limited Warranty on Parts

**Federal Tax Credit Information:

The purchase and installation of this energy-efficient product in your home qualifies you for a Federal Tax Credit.

The 2010 tax credit is worth 30% of the item's total cost (including installation), up to a maximum of $1,500. The credit is applicable on products placed in service between January 1, 2009 and December 31, 2010 and installed in your primary residence.

The 2011 tax credit extension is worth 10% of the item's total cost up to of $500 (installation cost is not included). The credit is applicable on products placed in service between January 1, 2011 and December 31, 2011 and installed in your primary residence. There is a $500 cap for the 2011 tax credit extension, so if you have claimed $500 or more since January 1, 2005, you are not eligible for the credit. Additional caps have been placed on specific product categories, including a $300 cap for water heaters and a $150 cap for boilers.

Since this non-solar propane water heater has either an Energy Factor greater than or equal to 0.82 or a thermal efficiency of at least 90%, it qualifies for the Federal Tax Credit.

To apply for the tax credit, you must file and submit the relevant tax forms. For products "placed in service" in 2011, you would take the tax credit on your 2011 income taxes. Remember to save your receipts and the Manufacturer's Certification Statement for your records.

Please see Federal Tax Credits for Consumer Energy Efficiency for additional information.