Plumbing With PEX » Ranco

Temperature Sensor For Ranco Control [1309007-044]

pexsupply111125 — Fri, 25 Nov 2011 01:47:37 +0000

Product: Temperature Sensor For Ranco Control
Manufacturer: Ranco

Part Number: 1309007-044

Price: $13.95

Free Shipping Eligible: No
Description: This sensor can be used to replace the one that came with your Ranco ETC digital temperature controller or multiple sensors can be wired for average temperature sensing. See the instructions for your controller for wiring instructions and recommendations. This sensor is designed for use with ONLY Ranco ETC temperature regulating controls.

It is a negative temperature coefficient (NTC) thermistor sensor. The sensor resistance decreases with temperature increase. It is 0.25" x 1.94" long with 8 feed of #22 AWG cable. The thermistor has a reference resistance of 30,000 ohms at 77°F(25°C). Supports temp range of -30°F – 220°F

Note: The manufacturer does not recommend the sensor be directly submersed in liquids. They recommend using a thermal well (bulb well) to protect the sensor.

Single Stage ETC Temperature Control w/ Sensor (120/240V Input) – Includes 8' Cord [ETC-111000]

pexsupply111125 — Fri, 25 Nov 2011 01:47:37 +0000

Product: Single Stage ETC Temperature Control w/ Sensor (120/240V Input) – Includes 8' Cord
Manufacturer: Ranco

Part Number: ETC-111000

Price: $49.45

Free Shipping Eligible: No
Description: Digital Display

Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display.
When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized.

Remote Temperature Sensing

The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire.

Built-In Safety

Every ETC model is equipped with diagnostic programs that check for hardware, software, or system problems and display different error codes to indicate where the trouble is.
The ETC also has a keyword lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad function.

Specifications

Temperature Setpoint Range: -30° to 220°F
Differential Range: 1 to 30 Degrees F
Input Power Requirements: 120/208/240 VAC
Sensor: Thermistor, 2" long x 1/4" Diameter, with 8' cable
Control Ambient Temperatures: Operating (20-140), Storage (40-176)
Ambient Humidity: 0 to 95% RH, non-condensing
Enclosure: NEMA 1
Dimensions: 6.52" high x 2.7" wide x 2.48" deep
Agency Approvals: UL Listed, CSA Certified
Switch Action: SPDT

Single Stage ETC Temperature Control w/ Sensor (120/240V Input, 0-10V Ouput) [ETC-111100]

pexsupply111125 — Fri, 25 Nov 2011 01:47:37 +0000

Product: Single Stage ETC Temperature Control w/ Sensor (120/240V Input, 0-10V Ouput)
Manufacturer: Ranco

Part Number: ETC-111100

Price: $74.95

Free Shipping Eligible: No
Description: Digital Display

Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display.
When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized.

Remote Temperature Sensing

The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire.

Built-In Safety

Every ETC model is equipped with diagnostic programs that check for hardware, software, or system problems and display different error codes to indicate where the trouble is.
The ETC also has a keyword lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad function.

Specifications

Temperature Setpoint Range: 30 to 220 Degrees F
Differential Range: 1 to 30 Degrees F
Input Power Requirements: 120/208/240 VAC
Sensor: Thermistor, 2" long x 1/4" Diameter, with 8' cable
Control Ambient Temperatures: Operating (20-140), Storage (40-176)
Ambient Humidity: 0 to 95% RH, non-condensing
Enclosure: NEMA 1
Dimensions: 6.52" high x 2.7" wide x 2.48" deep
0 to 10V output Impedance: 1 k ohms
Agency Approvals: UL Listed, CSA Certified
Switch Action: SPDT

Single Stage Temperature Control w/ Sensor (24V Input) [ETC-112000]

pexsupply111125 — Fri, 25 Nov 2011 01:47:37 +0000

Product: Single Stage Temperature Control w/ Sensor (24V Input)
Manufacturer: Ranco

Part Number: ETC-112000

Price: $61.95

Free Shipping Eligible: No
Description: Digital Display

Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display.
When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized.

Remote Temperature Sensing

The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire.

Built-In Safety

Every ETC model is equipped with diagnostic programs that check for hardware, software, or system problems and display different error codes to indicate where the trouble is.
The ETC also has a keyword lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad function.

Specifications

Temperature Setpoint Range: 30 to 220 Degrees F
Differential Range: 1 to 30 Degrees F
Input Power Requirements: 24 VAC
Sensor: Thermistor, 2" long x 1/4" Diameter, with 8' cable
Control Ambient Temperatures: Operating (20-140), Storage (40-176)
Ambient Humidity: 0 to 95% RH, non-condensing
Enclosure: NEMA 1
Dimensions: 6.52" high x 2.7" wide x 2.48" deep
Agency Approvals: UL Listed, CSA Certified
Switch Action: SPDT

Single Stage Temperature Control w/ Sensor (24V Input, 0-10V Ouput) [ETC-112100]

pexsupply111125 — Fri, 25 Nov 2011 01:47:37 +0000

Product: Single Stage Temperature Control w/ Sensor (24V Input, 0-10V Ouput)
Manufacturer: Ranco

Part Number: ETC-112100

Price: $76.45

Free Shipping Eligible: No
Description: Digital Display

Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display.
When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized.

Remote Temperature Sensing

The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire.

Built-In Safety

Every ETC model is equipped with diagnostic programs that check for hardware, software, or system problems and display different error codes to indicate where the trouble is.
The ETC also has a keyword lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad function.

Specifications

Temperature Setpoint Range: 30 to 220 Degrees F
Differential Range: 1 to 30 Degrees F
Input Power Requirements: 24 VAC
Sensor: Thermistor, 2" long x 1/4" Diameter, with 8' cable
Control Ambient Temperatures: Operating (20-140), Storage (40-176)
Ambient Humidity: 0 to 95% RH, non-condensing
Enclosure: NEMA 1
Dimensions: 6.52" high x 2.7" wide x 2.48" deep
0 to 10 V output impedance: 1 k ohms
Agency Approvals: UL Listed, CSA Certified
Switch Action: SPDT

Single Stage ETC Temperature Control w/ Sensor (120/240V Input, Plastic Enclosure) [ETC-141000]

pexsupply111125 — Fri, 25 Nov 2011 01:47:37 +0000

Product: Single Stage ETC Temperature Control w/ Sensor (120/240V Input, Plastic Enclosure)
Manufacturer: Ranco

Part Number: ETC-141000

Price: $103.95

Free Shipping Eligible: No
Description: Digital Display

Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display.
When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized.

Remote Temperature Sensing

The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire.

Built-In Safety

Every ETC model is equipped with diagnostic programs that check for hardware, software, or system problems and display different error codes to indicate where the trouble is.
The ETC also has a keyword lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad function.

Specifications

Temperature Setpoint Range: 30 to 220 Degrees F
Differential Range: 1 to 30 Degrees F
Input Power Requirements: 120/208/240 VAC
Sensor: Thermistor, 2" long x 1/4" Diameter, with 8' cable
Control Ambient Temperatures: Operating (20-140), Storage (40-176)
Ambient Humidity: 0 to 95% RH, non-condensing
Enclosure: NEMA 4
Dimensions: 7.84" high x 2.7" wide x 2.48" deep
Agency Approvals: UL Listed, CSA Certified
Switch Action: SPDT

Two Stage Temperature Control w/ Sensor (120/240V Input) [ETC-211000]

pexsupply111125 — Fri, 25 Nov 2011 01:47:37 +0000

Product: Two Stage Temperature Control w/ Sensor (120/240V Input)
Manufacturer: Ranco

Part Number: ETC-211000

Price: $99.85

Free Shipping Eligible: No
Description: Digital Display

Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display.
When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized.

Remote Temperature Sensing

The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire.

Built-In Safety

Every ETC model is equipped with diagnostic programs that check for hardware, software, or system problems and display different error codes to indicate where the trouble is.
The ETC also has a keyword lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad function.

Specifications

Temperature Setpoint Range: 30 to 220 Degrees F
Differential Range: 1 to 30 Degrees F
Input Power Requirements: 120/208/240 VAC
Sensor: Thermistor, 2" long x 1/4" Diameter, with 8' cable
Control Ambient Temperatures: Operating (20-140), Storage (40-176)
Ambient Humidity: 0 to 95% RH, non-condensing
Enclosure: NEMA 1
Dimensions: 6.52" high x 2.7" wide x 2.48" deep
Agency Approvals: UL Listed, CSA Certified
Switch Action: SPDT

Two Stage Temperature Control w/ Sensor (120/240V Input, 0-10V Output) [ETC-211100]

pexsupply111125 — Fri, 25 Nov 2011 01:47:37 +0000

Product: Two Stage Temperature Control w/ Sensor (120/240V Input, 0-10V Output)
Manufacturer: Ranco

Part Number: ETC-211100

Price: $124.95

Free Shipping Eligible: No
Description: Digital Display

Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display.
When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized.

Remote Temperature Sensing

The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire.

Built-In Safety

Every ETC model is equipped with diagnostic programs that check for hardware, software, or system problems and display different error codes to indicate where the trouble is.
The ETC also has a keyword lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad function.

Specifications

Temperature Setpoint Range: 30 to 220 Degrees F
Differential Range: 1 to 30 Degrees F
Input Power Requirements: 120/208/240 VAC
Sensor: Thermistor, 2" long x 1/4" Diameter, with 8' cable
Control Ambient Temperatures: Operating (20-140), Storage (40-176)
Ambient Humidity: 0 to 95% RH, non-condensing
Enclosure: NEMA 1
Dimensions: 6.52" high x 2.7" wide x 2.48" deep
0 to 10V output Impedance: 1 k ohms
Agency Approvals: UL Listed, CSA Certified
Switch Action: SPDT

Two Stage Temperature Control w/ Sensor (24V Input) [ETC-212000]

pexsupply111125 — Fri, 25 Nov 2011 01:47:37 +0000

Product: Two Stage Temperature Control w/ Sensor (24V Input)
Manufacturer: Ranco

Part Number: ETC-212000

Price: $97.85

Free Shipping Eligible: No
Description: Digital Display

Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display.
When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized.

Remote Temperature Sensing

The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire.

Built-In Safety

Every ETC model is equipped with diagnostic programs that check for hardware, software, or system problems and display different error codes to indicate where the trouble is.
The ETC also has a keyword lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad function.

Specifications

Temperature Setpoint Range: 30 to 220 Degrees F
Differential Range: 1 to 30 Degrees F
Input Power Requirements: 24 VAC
Sensor: Thermistor, 2" long x 1/4" Diameter, with 8' cable
Control Ambient Temperatures: Operating (20-140), Storage (40-176)
Ambient Humidity: 0 to 95% RH, non-condensing
Enclosure: NEMA 1
Dimensions: 6.52" high x 2.7" wide x 2.48" deep
Agency Approvals: UL Listed, CSA Certified
Switch Action: SPDT

Two Stage Temperature Control w/ Sensor (24V Input, 0-10V Output) [ETC-212100]

pexsupply111125 — Fri, 25 Nov 2011 01:47:37 +0000

Product: Two Stage Temperature Control w/ Sensor (24V Input, 0-10V Output)
Manufacturer: Ranco

Part Number: ETC-212100

Price: $123.95

Free Shipping Eligible: No
Description: Digital Display

Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display.
When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized.

Remote Temperature Sensing

The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire.

Built-In Safety

Every ETC model is equipped with diagnostic programs that check for hardware, software, or system problems and display different error codes to indicate where the trouble is.
The ETC also has a keyword lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad function.

Specifications

Temperature Setpoint Range: 30 to 220 Degrees F
Differential Range: 1 to 30 Degrees F
Input Power Requirements: 24 VAC
Sensor: Thermistor, 2" long x 1/4" Diameter, with 8' cable
Control Ambient Temperatures: Operating (20-140), Storage (40-176)
Ambient Humidity: 0 to 95% RH, non-condensing
Enclosure: NEMA 1
Dimensions: 6.52" high x 2.7" wide x 2.48" deep
0 to 10 V output impedance: 1 k ohms
Agency Approvals: UL Listed, CSA Certified
Switch Action: SPDT