Freeze Free cable can be applied on water-filled metal orrigid plastic pipes up to 2" (50.80mm) in diameter. On smaller size pipes, the cable can usually be applied straightalong the pipe. However, on longer pipes and especiallyat lower temperatures, the cable must be spiraled aroundthe pipe. This ensures adequate heat is applied to thepipes to keep them from freezing. Because of the self-regulating feature of this cable, it can be safely wrapped over itself (overlapped), if necessary, when installed on pipes, valves or flanges.

The Easy Heat Freeze Free cable is available witha power density of 3 Watts per foot. This power isspecified at a surrounding temperature of 50 degrees F. At other temperatures, of course, the cable poweroutput will be considerably different.

EasyHeat, your industry leader in pipe freeze prevention and roof-and-gutter deicing applications, introduces PSR pre-terminated, self-regulating heating cable. Imagine the convenience: each PSR cable is a pre-terminated, off-the-shelf product with the efficiency and functionality of self-regulating technology. With this built-in application flexibility, PSR becomes a first-choice solution for your heat tracing needs.

PSR is a parallel resistance cable with factory sealed connections. It is manufactured with water-resistant TPE outer jacket, UL Listed to Canadian safety standards and CSA Certified for ordinary locations. Rated at 5 watts per foot at 50°F. 120 VAC models have integral three-wire plug with pilot light; 240 VAC models have three-wire pigtail.

Features:

• Prevent water pipes from freezing
• Prevent the formation of ice dams on roof tops
• Suitable for use on metal and plastic pipes up to 2-1/2" in diameter
• All cables have a 30" cold lead
• Pilot light in the plug on 120 VAC
• PSR 120 VAC heating cables have a power indicator light in the plug, visual assurance that the system is energized.
• Cable can be overlapped if necessary
• Self-regulating heating cable means energy efficiency. The heat output is varied in relation to the ambient temperature. As the surrounding temperature increases, theheat output of the PSR cable decreases. But when the temperature decreases, the cable heat output increases and provides the heat needed along the length of the cable.

The PSR system can be installed with the confidence that it will operate satisfactorily for years. When it comes to freezeprotection, stay with the leader – Easy Heat.

ADKS is a fixed resistance, pre-terminated cable. It is CSA Certified and UL Listed to Canadian safety standards. Features a three wire grounded plug with a 6-foot/2-meter power cord, and includes an appropriate number of roof clips and cable spacers.

This product is for the sole intended use of preventing icedams from forming on inclined roofs with tab shingles, ingutters and in downspouts. It must never be installed on a flat roof or on combustible materials. It is not suitable for use on metal roofs.

Includes:

• De-icing Cable
• Shingle Clips
• Cable Spacers
• Installation Instructions
• Electrical Panel Labels

The MSC-1 can access information from three different types of moisture sensors – surface (in-ground), aerial and gutter – and one type of temperature sensor. The surface, aerial and gutter sensors detect moisture (snow, ice, sleet, etc.) and send appropriate signals to the MSC-1. Similarly, the temperature sensor sends temperature data back to the MSC-1. Independent temperature and moisture information is processed by the MSC-1 to ensure that heating equipment will only be energized during freezing conditions. Each MSC-1 must have a temperature sensor, TS-1, in order to function. The TS-1 is included with each MSC-1.

The TS-1 temperature sensor measures outside temperatures and is placed in the area that bestrepresents the outdoor temperature conditions. The TS-1 operates on low voltage provided by the MSC-1 control unit and allows the MSC to determine when to activate snowmelting or de-icing equipment. Easily affixed to a wall or fascia by two screws, the TS-1's small size and neutral color allows the sensor to discreetly blend with almost any background. The TS-1 is supplied with 10' (3.05m) of connection wire which may be extended up to 500' (152.40m) with an appropriately rated 18 – 20 AWG 3 wire unshielded cable<br
Features:

• Automatic snow/ice melting control
• Housed in enclosure suitable for commercial/industrial applications
• LCD display, programming, and associated indicator lights for operation of each zone
• Manual zone activiation
• UL Listed to US and Canadian safety standards
• Hold on Time: Adjustable 0-10 hours in half-hourincrements
• Maximizes energy efficiency
• Monitors and controls 3 separate zones, sequentiallyor independently
• Reduced power requirements when priority operationmode is used

Freeze Free cable can be applied on water-filled metal orrigid plastic pipes up to 2" (50.80mm) in diameter. On smaller size pipes, the cable can usually be applied straightalong the pipe. However, on longer pipes and especiallyat lower temperatures, the cable must be spiraled aroundthe pipe. This ensures adequate heat is applied to thepipes to keep them from freezing. Because of the self-regulating feature of this cable, it can be safely wrapped over itself (overlapped), if necessary, when installed on pipes, valves or flanges.

The Easy Heat Freeze Free cable is available witha power density of 3 Watts per foot. This power isspecified at a surrounding temperature of 50 degrees F. At other temperatures, of course, the cable poweroutput will be considerably different.

EasyHeat, your industry leader in pipe freeze prevention and roof-and-gutter deicing applications, introduces PSR pre-terminated, self-regulating heating cable. Imagine the convenience: each PSR cable is a pre-terminated, off-the-shelf product with the efficiency and functionality of self-regulating technology. With this built-in application flexibility, PSR becomes a first-choice solution for your heat tracing needs.

PSR is a parallel resistance cable with factory sealed connections. It is manufactured with water-resistant TPE outer jacket, UL Listed to Canadian safety standards and CSA Certified for ordinary locations. Rated at 5 watts per foot at 50°F. 120 VAC models have integral three-wire plug with pilot light; 240 VAC models have three-wire pigtail.

Features:

• Prevent water pipes from freezing
• Prevent the formation of ice dams on roof tops
• Suitable for use on metal and plastic pipes up to 2-1/2" in diameter
• All cables have a 30" cold lead
• Pilot light in the plug on 120 VAC
• PSR 120 VAC heating cables have a power indicator light in the plug, visual assurance that the system is energized.
• Cable can be overlapped if necessary
• Self-regulating heating cable means energy efficiency. The heat output is varied in relation to the ambient temperature. As the surrounding temperature increases, theheat output of the PSR cable decreases. But when the temperature decreases, the cable heat output increases and provides the heat needed along the length of the cable.

The PSR system can be installed with the confidence that it will operate satisfactorily for years. When it comes to freezeprotection, stay with the leader – Easy Heat.

As snow accumulates on a roof in winter, inadequateceiling insulation and/or roof venting can allow the roofsurface above heated areas of the building to get warmenough to melt some of the snow on the roof surface, evenon cold winter days. This water will then flow down the roof and may accumulate and freeze in gutters, possibly even overflowing them and forming long icicles. Continued freezing of this water causes the layer of ice to build up that can eventually can become several inches thick. This results in water "ponding", at the warm/ cold transition point of the roof, and seeping between the shingles. Once water gets under the shingles, it can leak through the roof sheathing, at nail holes or other roof penetrations and down inside the building walls, ceiling, etc. By applying heating cable on the roof edge above the overhang, and in the gutter and downspouts, water melting on the roof will always have a clear path to the ground.

How it Works: A special self-regulating core is at thecenter of the SR Trace cable. This core is conductive and adjusts according to the surrounding temperatures. Whenit is cold, the cable's core has many conductive paths that generate enough heat to keep the water flowing in thepipe. As the surrounding temperature warms, there are fewer conductive paths and less heat is generated. Thisself-regulating technology ensures the right amount of heat when and where it is needed.

Features:

• Self-dispensing reel box
• Rugged, waterproof construction
• Will not damage temperature sensitive roof coatings
• Heat output of 8 watts/foot (30.48cm) when deicing
• 142 ft. (43.28m) circuit lengths for 120 volt cable
• 381 ft. (116.13m) circuit lengths for 240 volt cable
• 240 volt cable can be used for 208 volt or 277 voltapplications